Solid timber counter tops are all-natural products constructed from wood from trees about 120 years old. Timber is a living product as well as the even more moisture gets, the extra the wood counter top will certainly expand. The timber we made use of in solid wood worktops has actually been formerly kiln dried to a humidity degree of 6%, and also it is for that reason crucial that the worktop is not revealed to a continuously high level of moisture. Generally the humidity level in kitchens is around 50-70%.
The strong timber top must be attached to the cupboard box utilizing just timber screws and also washing machines. It is not recommended at all to glue the top on the cabinet box; the top as well as the box broaden as well as acquire at various prices, as a result splits could at some point appear, the majority of probably on the cabinets' surface area.
The correct way of installing a solid wood top is utilizing steel correctings along the cupboard box (see our websites).
The metal fixings must be uniformly dispersed throughout the size of the top, spaced at a 1' - 1.5' range from each other. Across the size, the top is normally taken care of to each metal support with 3 screws, one in the center, one toward the leading edge and one toward the back side. The supports have to be perfectly leveled; or else stress can develop in the wood, bring about bending, cupping, or fractures.
We suggest pre-drilling the screw holes into the timber countertop, to avoid fractures and splits. For the exact same factor, it is a great suggestion not to over tighten up the screws. The finishing will substantially lessen the degree of such motions, however will not remove them entirely. Because of the panel's laminated structure, the lengthwise motions are unimportant, so the installer should pay attention to the activities happening across the panel's width. In order to prevent the growth of internal tensions, the openings in the metal repairings should be extended towards the activities (see our web page ).
When exposed to regular moisture levels - i.e. 50-60% - the worktop's size will certainly broaden by 1/12"-1/ 24", but when exposed to a degree of 80-90%, this measurement might expand by as much as 1/2" and even much more for some varieties. As a result, when the rear side of the counter top is set up against a wall surface, the wall surface could restrict live edge table the top's all-natural motions, resulting in undesirable tensions in the timber. To avoid this, you can enable a 1/4"-1/ 2" joint in between the wall as well as the countertop side as well as caulk it with a thin proposal of acid-free silicone.
Additionally, you can strongly repair the back side to the metal supports underneath and also thus, permit the natural movements to take place at the expense of the contrary side.
In this case, the holes in the metal dealings with corresponding to the back side will be no bigger than the screws size, while the holes matching to the center section and also the leading edge will certainly be elongated.
For extra details concerning the installation of timber kitchen counters, bar tops and kitchen area islands, please see our website.